Why are Stormwater Pumps Used in Apartment Buildings?

Stormwater is essentially excess surface water resulting from heavy rainfall or snowfall. Stormwater pumps help protect buildings by pumping away large volumes of water and preventing flooding. The majority of cities and municipalities are located by or near water bodies, so they require an extensive, reliable pumping system capable of handling large amounts of water.

Natural water runoff is problematic in flat areas, making reliability a main parameter when designing a stormwater installation.

Floodwater contains many fibrous and solid materials, including branches, leaves, weeds, trash, dirt, silt, mud, and sediments. Because debris cannot enter the pumps or deposit must not accumulate in the pump sump, the design of the pumps and station face demanding requirements.

Inflow to the station will vary immensely between dry seasons and flooding events. The most reliable pumps should be used with a sound station design to ensure a secure operation. If you are searching for an ideal storm water pump, check out the website to get more information.

Need for stormwater pump system in your apartment building:

Water-logging in apartments is a common problem, especially when it rains heavily. It can have serious consequences, such as weakening the foundation of the entire building if it remains unchecked. The reasons for water-logging are improper stormwater management, basement flooding, and improper rainwater harvesting. Stormwater pump stations can be the solution to the problems of drainage.

Stormwater pump stations are intermediate stormwater collection tanks equipped with submersible pumps. As opposed to relying on gravity to cause the water to flow to the discharge point, the pump generates the additional pressure needed to compensate for the difference in head pressure. An underground pump station collects stormwater from a car parking, residential, commercial, or industrial area. 

As the level of water increases, the pump turns on and pumps the water out to the release point, even if that point is higher than the level in the pump station. In this way, the stormwater pump station stops ponding water on a car park surface, damaging the surface, or becoming a hazard for drivers. An ineffective drainage system will result in flooding when it rains because stormwater has nowhere to go. It is necessary to use a pump station whenever gravity cannot drain the expected flow rate. 

What should be considered while installing a stormwater pump station?

Many factors influence the pump station’s design size, including the invert level on the chamber, water holding capacity time and risk, and pump flow rate to vacate the water levels. The other factors to be considered are:

Cost: Underground stormwater pumps require excavation because their installation takes place underground. Despite their versatility, they are more challenging to install in some ground conditions (such as rocky or water-logged ground) and therefore more expensive. 

Power: Stormwater pump stations require electricity for motion, so their locations must have access to power. To conduct regular maintenance on the pump station, you should also consider the accessibility of the site. 

Monitoring: Automation systems are vital to a stormwater pump station to begin and stop the pump relying on the tank’s water level. You can also establish a monitoring kit to notify someone of a failure in level instrumentation or the loss of the pump to start. Remote monitoring is available for provincial areas, while control panels and alarms are standard accessories for systems above 250-liter capacity.

Bottom Line:

Any organization, building, or area requires stormwater pump stations to process stormwater caused by rain or snow and overcome the problem of drainage and flow. Floodwater may contain solids and large amounts of fibrous material.

Large inflows can occur within a short period, so a pump must be equipped to meet the demands of high operational reliability. Stormwater management must meet municipal requirements from a regulatory perspective. A pump station can assist companies in taking corrective measures before the water is discharged to the municipal system.

Stories Flow

Back to top