Not everyone enjoys a great internet journey with their TP-Link range extenders. If you are reading this post, then chances are that you are struggling with the TP-Link extender not working issue. Many users consider resetting TP Link extender in the first place to get rid of it. Well, resetting the extender should not be your first troubleshooting hack. In this post, we will shed light on other tips to fix the issue you are facing. So, let’s get started.
Fixed: TP-Link Extender Not Working
- Check Power Socket
The first and foremost reason behind the TP-Link extender not working issue might be the use of a faulty power source. Know that it can result in insufficient power supply and can damage your extender too.
Therefore, either repair the existing wall socket or plug your TP-Link range extender into the one that is working perfectly. You can also use a UPS to ensure an uninterrupted power supply to your extender. However, avoid using a surge protector to power up the TP-Link range extender.
- Reboot the Extender
Sometimes, minor glitches with your range extender can make it non-functional. But, it doesn’t mean that you cannot get rid of them and bring your extender back to its normal working position. So, to get the problem fixed, consider rebooting your range extender.
Given below is the outline of the rebooting process:
- Disconnect your TP-Link range extender from the power source.
- Let it stay idle for a couple of minutes.
- Re-connect your TP-Link extender to the power source.
Once your extender gets rebooted, check whether it has returned to its working state or not. If not, then keep reading.
- Connect WiFi Devices Properly
Chances are that your TP-Link extender is not working due to its unstable connection with the WiFi router. Therefore, stabilize the connection between your WiFi devices. However, it completely depends on the source of connection used.
If you have used a wireless source to connect your extender to the router, make sure that both devices are within the range. On the other hand, if the connection is wired, check for the cuts on the network cable. If it has cuts, then don’t wait to replace it with a new Ethernet cable.
- Eliminate WiFi Interference
After the completion of the TP Link WiFi extender setup process, users are advised to change the location of their device. It is done to fill the dead zones with life. But, it looks like you selected an improper location for your extender due to which it failed to work efficiently. But, it’s not too late. You can still get your TP-Link extender back to its normal state by relocating it.
While relocating your TP-Link range extender, make sure that it is placed nowhere near metal objects, reflexive surfaces, utensils containing a large amount of water, and masonry constructions. Also, try not to place your wireless extender near televisions, refrigerators, Bluetooth speakers, cellular phones, treadmills, and tracking devices.
- Is Your Extender Overheating?
Being a networking and electronic device, your TP-Link extender will inevitably produce heat. But, if it overheats, then it can also be one of the reasons behind the TP-Link extender not working issue. So, switch off the extender when not in use. Apart from that, consider not exposing the extender to direct sunlight.
You can also prevent the phenomenon of overheating by cleaning your extender regularly and using a USB fan.
- Connect the Antennas Properly
Improper connection of the antennas can also lead you to the TP-Link extender not working issue. The antennas of your TP-Link extender should not only be connected properly and firmly but also needs to be in the correct position.
The positions of the antennas of your TP-Link extender should either be at an angle of 0 degrees (parallel to the extender) or 90 degrees (perpendicular to the extender). This is necessary so that the signal transmission takes place in all the planes.
After following these tips, you might be able to make your TP-Link extender functional again. However, if nothing brings you success, reset TP Link extender and set it up from scratch. This time you will surely get success in resolving the issue.
Quick Tip: An outdated firmware of your TP-Link extender can be a major troublemaker. Therefore, to avoid issues like the TP-Link extender not working in the future, it is advised to keep the firmware of the device updated.