Why is My TP-Link WiFi Repeater Not Connecting to Internet?

Is your TP-Link wireless repeater refusing to connect to the internet? If the answer is yes, then you might be thinking, ‘What was even the point of performing TP-Link repeater setup via http://tplinkrepeater.net when I had to face internet issues?’

Well, the good news is that your days of worry are over because we are here to assist you now. In this article, you will find some troubleshooting hacks following which you will surely be able to resolve the TP-Link repeater not connecting to the internet issue in a matter of minutes. Thus, wait no more, and read on.

Fixed: TP-Link Repeater Not Connecting to Internet

  1. Reboot Your TP-Link Repeater

We all know what technical glitches are capable of doing: degrading the overall performance of a device. Chances are that they are stopping your TP-Link wireless repeater from connecting to the internet.

If that is the case, then you can get rid of these glitches by simply rebooting your TP Link repeater. Here’s how you can easily go about the process:

  • Turn off your TP-Link wireless repeater.
  • Pull the repeater from the wall socket it is plugged into.
  • Wait for some time.
  • Plug your repeater back into its wall socket.
  • Do not forget to press the Power button on your TP-Link repeater.

Note: Whether you have performed TP Link AC750 setup or configured any other repeater model in your home, these steps will remain the same for all.

Once you are done rebooting your device, try to connect it to the internet. Did you get any luck? No? Well, in that case, it is recommended that you take the help of the next troubleshooting hack.

  1. Change Your Connection Source

Have you used an Ethernet cable to connect your TP-Link wireless repeater and your home router? Well, that is exactly what you should not have done. A wired connection is not always a reliable source to consider when it comes to building connections between devices.

Therefore, it is recommended that you rectify your mistake immediately by connecting your devices with the help of a wireless source.

  1. Pull Your Devices Closer

Too much distance between your TP-Link WiFi repeater and your home router can also cause internet-related issues.

Therefore, if you haven’t placed your repeater in the same room as that of the router, it is recommended that you do it now.

  1. Avoid Signal Interference

Your TP-Link wireless repeater should not be placed anywhere near cordless phones, washing machines, baby monitors, Bluetooth speakers, refrigerators, mirrors, microwave ovens, fish tanks, treadmills, televisions, aluminium studs, corners, concrete walls, and utensils containing water.

The reason being, such things can interrupt the WiFi signals of your repeater from getting transmitted and lead you to similar issues like the TP-Link repeater not connecting to internet issue.

  1. Call Your Internet Service Provider

If you haven’t done it already, it is recommended that you get in touch with your Internet Service Provider. Chances are that your ISP is not doing his job properly. If he agrees to the same, then give him a strict deadline to get the internet issue fixed.

Once he had done his job, try to connect your TP-Link repeater to the internet. Did you still not get any luck? Well, in that case, perform factory default reset.

  1. Reset Your TP-Link Repeater

Follow the step-by-step guidelines mentioned below and learn how to reset your TP Link wireless repeater:

  • Look for the Reset button on your TP-Link repeater.
  • Once found, take an oil pin and use it to press the Reset button.
  • Wait for a few seconds.

The minute you are done resetting your TP Link wireless repeater, set it up from scratch. Not sure about the setup process? Refer to the user manual. There, you will get to know how to perform TP-Link repeater setup using the TP Link app as well as the Manual method.

In the Nutshell

Our guide to troubleshoot the TP-Link repeater not connecting to internet issue has concluded here. If you are aware of any other hack except the ones mentioned above through which this issue can be resolved, do let us know via the comment section.

sallylowrance

Back to top